ANSI B16. 5 class 150 covers dimensions for weld neck flanges from 1/2" to 24" nominal pipe size diameter with or without 1/16" raised face.Pressure rating is defined as the maximum allowed pressure that a flange can withstand at increasing temperatures. According to the ANSI/ASME B16. 5 specification, there are seven flange pressure ratings: 150, 300, 400, 600, 900, 1500, and 25001. Standard:ANSI B16.52. Type:Plate flange,Slip on,Blind，Lap Joint flange3. Pressure Class:Class 150,Class 300,Class 400,Class 6004. Dimension:1/2''-24''5.
Contact Now
The nominal size is less than or equal to DN600, the nominal pressure is Class150, the sealing surface is flat, and the length and quality of the hexagon head bolts or studs used for steel pipe flange connection can refer to the regulations in Table A4 for selection.
Contact Now
We have reliable manufacturers to purchase directly, support customization, have good quality, have real materials, and are durable.Flange, additionally recognized as flange disc or flange. Flanges are components that are interconnected between shafts and shafts for connections between pipe ends; There are additionally flanges used on the inlet and outlet of tools for the connection between two devices, such as reducer flanges.
Contact Now
American standard flange is a component that connects pipes to each other and is connected to the pipe end. The American standard flange has eyelets and bolts to tightly connect the two flanges. The flanges are sealed with gaskets. American standard flanges can be cast or threaded or welded.In industrial pipelines, American standard flange connections are widely used. In the home, the diameter of the pipeline is small and it is low pressure, so flange connections cannot be seen. If in a boiler room or production site, flange connected pipes and equipment can be seen everywhere1.
Contact Now
The ANSI Class rating of a flange is defined as the maximum amount of pressure that the flange can withstand at increasing temperatures. There are seven primary pressure classes for flanges. They are 150,300,400,600,900,1500,and2500.American standard flange connection is a detachable connection. It is the process of fixing two pipes, fittings, or equipment onto a flange, with flange gaskets added between the two flanges and bolts fastened together to complete the connection. American standard flange connection is an important connection method for pipeline construction.
Contact Now
The nominal strain grades such as the PN20, PN50, PN 110, PN 150, PN 260 and PN 420 metal En 1092-1 Type 01 Plate Flange are designed to be interchangeable with flanges to American requirements such as the ANSI/ASME B16.1. Standard:EN1092-12. Type:Type 01 ;Type 05;3. Pressure Class:PN6;PN10; PN16; PN25; PN404. Dimension:DN10-DN20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1. Standard:EN1092-12.
Contact Now
The formal title for blind disks is flange cover, and some are additionally known as blind flanges or pipe plugs. It is a flange barring a gap in the middle, used to seal the pipe opening. The feature is the identical as that of the head and pipe cap, without that the blind seal is a removable sealing device, and the seal of the head is no longer meant to be opened again.1. Standard:ANSI B16.52. Type:Plate flange,Slip on,Blind，Lap Joint flange3. Pressure Class:Class 150,Class 300,Class 400,Class 6004. Dimension:1/2''-24''5.
Contact Now
The main use of flange is to connect pumps, pipes, valves, and other equipment to make a pipework system. Usually, flanges are threaded or welded, and you can connect two flanges by bolting them with gaskets and providing a seal that gives easy access to the piping system.1. Standard:JIS B2220 2. Type:SOP3. Pressure Class:1k;5k;10k;16k;30K:40K4. Dimension:10A-1200A5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:SS4007. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1.
Contact Now
Flange, moreover acknowledged as flange flange or flange. the flange is the connecting thing amongst the shaft and the shaft, it is used for the relationship amongst the pipe ends; the flange on the device inlet and outlet is additionally used for the relationship amongst gadget, inclusive of the reducer flange. flange connection or flange joint refers to the detachable connection of flange, gasket and bolt as a set of combined sealing shape.
Contact Now
Flanges normally need to be produced in accordance with standards, and more often in accordance with national standards to produce flanges, that is: according to the size and tolerance range required by national standards to produce flanges, such standard flanges In use, although they can also be used, but more often, the requirements of industrial production for flanges are different, so the specifications of flanges will also change, for example, industrial production can not use standard flanges, only large flanges; Some industrial productions can only use smaller flanges, therefore, faced
Contact Now
According to the standard specifications of the GOST12820 and GosT12821 series, the thickness, aperture, thread, and other standards related to flange size are usually strict. These regulations can ensure that the size, quality, and performance of the flange meet the standards, ensuring the safe operation of the pipeline1. Standard:GOST 12820- 80 GOST 12821- 80 2. Type:Plate flange，Blind，Lap Joint flange3. Pressure Class:PN10 PN16 PN25 PN40 PN634. Dimension:DN10-DN12005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.
Contact Now
Shandong Shengli Forging Co., Ltd. specializes in producing various types of flanges, gear rings, and forgings. We welcome customers to visit and inspect1. According to the chemical industry (HG) industry standard: integral flange (IF), threaded flange (Th), plate flat welding flange (PL), neck butt welding flange (WN), neck flat welding flange (SO), socket welding flange (SW), butt welding ring loose flange (PJ/SE), flat welding ring loose flange (PJ/RJ), lining flange cover (BL (S)), flange cover (BL) [2].2.
Contact Now
SABS 1123 Flanges are forged, threaded, screwed or plate flanges as manufactured. These additionally vary in the face kind of the flange such as the flat face, raised face and the ring kind joint. There are one-of-a-kind practical kinds in the SANS 1123 Flanges such as socket weld ring flange, threaded ring flange, blind flange, weld neck flange, slip on flange, lap joint flange and so on. The dimensions of the flanges differ in accordance to the ASME B16.5 standard.
Contact Now
European standard EN 1092-1 – concerning flanges for pipes – establishes the requirements for steel flanges based on their nominal pressure (PN) and dimension (DN). Moreover, it defines the different kinds of flanges and their sealing surfaces, tolerances, threading and labelling1. Standard:EN1092-12. Type:Type 01 ;Type 05;3. Pressure Class:PN6;PN10; PN16; PN25; PN404. Dimension:DN10-DN20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9.
Contact Now
Japanese Industrial Standards (JIS) is the most important and authoritative national standard in Japan. Developed by the Japan Industrial Standards Survey (JISC).1. Standard:JIS B2220 2. Type:SOP SOH3. Pressure Class:20K4. Dimension:10A-1200A5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:SS400/SF440A7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1. Standard:JIS B2220 2. Type:SOP SOH3. Pressure Class:20K4. Dimension:10A-1200A5.
Contact Now
In the flange, FF represents a flat sealing surface, whilst in the Japanese standard, SOP is a plate kind flat welding flange, SOH is a neck flat welding flange, and BL is a flange cowlSocket welding flange (SW)Socket welding flangeSocket Welding FlangeSealing floor form: protruding floor (RF), concave and convex floor (MFM), tongue and groove floor (TG), ring connection floor (RJ)Materials: Carbon Steel: ASTM A105, 20#, Q235, 16Mn, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70;Alloy steel: ASTM
Contact Now
Our business enterprise can produce a number of specifications of stainless steel, alloy steel, and carbon metal flange merchandise in accordance to standards; The product has passed through strict first-class inspection, continuously striving for excellence in dimension and quality, and is broadly bought each domestically and internationally, receiving unanimous reward from clients each domestically and internationally.Flange, moreover considered as flange disc or flange.
Contact Now
Pipe flanges: (JIS B2201, JIS B2220, etc.) are self-contained and do not belong to either "American style flanges" or "European style flanges"Nominal diameter: (DN10~DN1000) mmNominal pressure levels: 2K, 5K, 10K, 16K, 20K, 30K, 40K, 63K, a total of 8 levelsFlange sealing surface: 5 types: smooth surface, large convex surface, small convex surface, concave convex surface, and tenon groove surfaceFlange types: 6 types: flat welding, socket welding, butt welding, threaded connection, loose sleeve, and blind flange1. Standard:JIS B22202. Type:SOP SOH3.
Contact Now
1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352. Type:SLIP-ON BLIND WEIDING NECK3. Pressure Class:6BAR 10BAR 16BAR 25BAR 40BAR4. Dimension:DN10-DN10005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352.
Contact Now
1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352. Type:SLIP-ON BLIND WEIDING NECK3. Pressure Class:6BAR 10BAR 16BAR 25BAR 40BAR4. Dimension:DN10-DN10005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352.
Contact Now
1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352. Type:SLIP-ON BLIND WEIDING NECK3. Pressure Class:6BAR 10BAR 16BAR 25BAR 40BAR4. Dimension:DN10-DN10005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352.
Contact Now
1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352. Type:SLIP-ON BLIND WEIDING NECK3. Pressure Class:6BAR 10BAR 16BAR 25BAR 40BAR4. Dimension:DN10-DN10005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352.
Contact Now
1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352. Type:SLIP-ON BLIND WEIDING NECK3. Pressure Class:6BAR 10BAR 16BAR 25BAR 40BAR4. Dimension:DN10-DN10005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2573 DIN2576 DIN2543 DIN2544 DIN2545 DIN2527 DIN2631 DIN2632 DIN2633 DIN2634 DIN26352.
Contact Now
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.1. Standard:JIS B2220 2. Type:SOP SOH3. Pressure Class:5k;10k;16k;30K:40K4. Dimension:10A-1200A5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:SS400/SF440A7. Packing：Wooden Case, Pallet.8. Payment:L/C, T/T9.
Contact Now
