DIN2543 16bar

Flange, moreover diagnosed as flange disc or flange. Flanges are aspects that are interconnected between shafts and shafts for connections between pipe ends; There are moreover flanges used on the inlet and outlet of equipment for the connection between two devices, such as reducer flanges. Flange connection or flange joint refers to the detachable connection of flange, gasket and bolt as a set of combined sealing structure. Pipe flange refers to the flange used for piping in the pipeline device, and the inlet and outlet flange of the equipment used in the equipment. There are holes in the flange, and the bolts make the two flanges carefully connected. The flange is sealed with a gasket. Flange reduce up threaded connection (wire connection) flange, welded flange and clip flange. The flanges are used in pairs, the low-pressure pipeline can use the wire flange, and the welded flange is used for pressures above four kilograms. A gasket is delivered between the two flanges and then bolted to tighten. The thickness of the flange for gorgeous pressures is different, and the bolts they use are moreover different. Water pumps and valves, when associated with pipelines, the factors of these equipment and tools are moreover made into corresponding flange shapes, moreover recognized as flange connections. All the connecting factors that are closed at the same time by way of way of bolting spherical the perimeter of the two planes are typically acknowledged as "flanges", such as the connection of air go with the flow ducts, this type of factors can be recognised as "flange parts". But this connection is completely a segment of the equipment, such as the connection of flange and pump, it is no longer appropriate to identify the pump "flange parts". Relatively small ones such as valves can be recognized as "flange parts".