PN16 Type 05 EN1092-1 Flange
A blind flange (also referred to as a 'closure plate flange') is mounted at the cease of a piping gadget to terminate a pipe. It has no centre gap (bore), so there is no drift thru the flange. A blind flange might also be used for separating a pipe, valve, or strain vessel.
The EN 1092-1 Type 05 flange shall be furnished as blind flange, which is used to clean off the piping. Substantially, it is a spherical stable disc with bolting holes drilled alongside the circumference. The EN 1092-1 Type 05 blind flanges may also be furnished with flat going through (FF) or raised dealing with (RF).
1. Standard: | ||
2. Type: | Type 01 ;Type 05; | |
3. Pressure Class: | PN6;PN10; PN16; PN25; PN40 | |
4. Dimension: | DN10-DN2000 | |
5. Surface Treament: | Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc. | |
6. Raw Material: | RST 37.2; P245GH ; S235JR | |
7. Packing： | Wooden Case, Pallet. | |
8. Payment: | L/C, T/T | |
9. Delivery time: | 30 ~60 days after confirm the order | |
1. Standard: | EN1092-1 | |
2. Type: | Type 01 ;Type 05; | |
3. Pressure Class: | PN6;PN10; PN16; PN25; PN40 | |
4. Dimension: | DN10-DN2000 | |
5. Surface Treament: | Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc. | |
6. Raw Material: | RST 37.2; P245GH ; S235JR | |
7. Packing： | Wooden Case, Pallet. | |
8. Payment: | L/C, T/T | |
9. Delivery time: | 30 ~60 days after confirm the order | |
