PN25 Type 05 EN1092-1 Flange
The EN 1092-1 Type 05 flange shall be furnished as blind flange, which is used to clean off the piping. Substantially, it is a round strong disc with bolting holes drilled alongside the circumference. The EN 1092-1 Type 05 blind flanges can also be furnished with flat dealing with (FF) or raised going through (RF).
European preferred EN 1092-1 – regarding flanges for pipes – establishes the necessities for metal flanges primarily based on their nominal strain (PN) and dimension (DN). Moreover, it defines the exceptional sorts of flanges and their sealing surfaces, tolerances, threading and labelling.
1. Standard: | ||
2. Type: | Type 01 ;Type 05; | |
3. Pressure Class: | PN6;PN10; PN16; PN25; PN40 | |
4. Dimension: | DN10-DN2000 | |
5. Surface Treament: | Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc. | |
6. Raw Material: | RST 37.2; P245GH ; S235JR | |
7. Packing： | Wooden Case, Pallet. | |
8. Payment: | L/C, T/T | |
9. Delivery time: | 30 ~60 days after confirm the order | |
1. Standard: | EN1092-1 | |
2. Type: | Type 01 ;Type 05; | |
3. Pressure Class: | PN6;PN10; PN16; PN25; PN40 | |
4. Dimension: | DN10-DN2000 | |
5. Surface Treament: | Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc. | |
6. Raw Material: | RST 37.2; P245GH ; S235JR | |
7. Packing： | Wooden Case, Pallet. | |
8. Payment: | L/C, T/T | |
9. Delivery time: | 30 ~60 days after confirm the order | |
