30K Sohrf JIS B2220
The Slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength andprevent leakage. Slip-on flanges are all bored slightly larger than the O.D. of the matching pipe. They are preferred over welding neck flanges by manyusers due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved.
Product Details
| 1. Standard: | JIS B2220 | |
| 2. Type: | SOH SOP | |
| 3. Pressure Class: | 30K | |
| 4. Dimension: | 10A-400A | |
| 5. Surface Treament: | Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc. | |
| 6. Raw Material: | SS400/SF440A | |
| 7. Packing： | Wooden Case, Pallet. | |
| 8. Payment: | L/C, T/T | |
| 9. Delivery time: | 30 ~60 days after confirm the order | |
| 1. Standard: | JIS B2220 | |
| 2. Type: | SOH SOP | |
| 3. Pressure Class: | 30K | |
| 4. Dimension: | 10A-400A | |
| 5. Surface Treament: | Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc. | |
| 6. Raw Material: | SS400/SF440A | |
| 7. Packing： | Wooden Case, Pallet. | |
| 8. Payment: | L/C, T/T | |
| 9. Delivery time: | 30 ~60 days after confirm the order | |
Leave your messages
Related News
Classification and Material of Flanges
2023-10-10
Flange
2023-10-10
